Client access

PIVOTING GATES F500/550/600S

PIVOTING GATES F500/550/600S

Photo 1Photo 2Photo 3Photo 4
  • Access control
  • For interior use
  • Anti-panic system
     

Description

The Slimline Pivoting Gateway is comprised of two devices. Each device is provided with an automatic pivoting panel and a cabinet with a barrier actuation mechanism. This gateway is particularly suitable for the control of secure access to sites. Its specific design, with a cabinet width reduced to 200mm and its glazed surface, make it suitable for incorporation in all environments where space-saving is essential.

 


 

 Operation

Once authorization has been cleared by a reader, the logic card-controlled drive system allows the panels to clear the access way. A shape recognition device (using scanner cells) allows the user to be monitored as they pass through the barrier.
Two modes of configuration are available :
     - Normally closed :  the panel is closed in standby mode, and will only open once the user has been cleared. All potential entry and exit configurations are possible: unres- tricted, controlled, prohibited.
     - Normally open  : the panels are open in standby mode. They will only close if a traveller ttempts to pass through the barrier without authorization. This particular configuration is compatible with an intense passenger flow, specifically for exiting passengers, and allows reduced energy onsumption.

 

Materials

  • Cabinet and covers : AISI 304 stainless steel with a brushed finish using 220 grain
  • E24 steel pedestal with cataphoretic protection or black powder coating
  • Inter-cabinet glazing of 12 mm tempered glass and panels of 8 mm tempered glass
  • All internal components are corrosion protected
  • Light pictograms : green arrow and red cross
     

Safety

Passenger safety :
   safety software allows the panels to be re-opened, should a person or obstacle become trapped.      
Anti-panic system :
    in case of the loss of power, the panels will open mechanically in the direction of exit.

Technical characteristics

  • Power supply : 230 V a.c. ± 5%
  • Frequency : 50-60 Hz
  • Power consumption : Standby 150 VA max – gate in service : 800 VA max
  • Control device voltage : 24 V d.c
  • Flow : 40 passages/minutes in controlled passage mode with contactless reader
  • Operating temperature : -5° to 45°
  • Environmental humidity : less than 80%
  • MCBF (mean cycles between failure), where recommendations are observed : 2,000,000 passages
  • Net weight : 160 or 185 kg
     

Options

  • 316 stainless steel construction
  • Laminated glass panels
  • Tinted glass panels
  • 900 mm PRM passage
  • Combined intermediate facility with normal passage and PRM passage
     
In the same product range
produit 30 produit 45