Client access

COMPACT PIVOTING GATES F500/550/600S

COMPACT PIVOTING GATES F500/550/600S

Photo 1Photo 2Photo 3Photo 4

 

  • Access control
  • For interior use
  • Anti-panic system

 

Description

The Slimline Pivoting Gateway is comprised of two devices. Each device is provided with an automatic pivoting panel and cabinet with a barrier actuation mechanism. This gateway is particularly suitable for the control of secure access to sites. Its specific design, with a cabinet width reduced to 200mm, a length of 1500 mm and its glazed surface make it suitable for incorporation in all environments where space-saving is essential

 

Operation

Once authorization has been cleared by a reader, the logic card-controlled drive system allows the panels to clear the access way. A shape recognition device (using scanner cells) allows the user to be monitored as they pass through the barrier.
Two modes of configuration are available :
    - Normally closed – the panel is closed in standby mode, and will only open once the user has been cleared. All potential entry and exit configurations are possible : unrestricted, controlled, prohibited.
    - Normally open – the panels are open in standby mode. They will only close if a traveller attempts to pass through the barrier without authorization. This particular configuration is compatible with an intense passenger flow, specifically for exiting passengers, and allows reduced electricity consumption.

Materials

• Cabinet and covers: AISI 304 stainless steel with a brushed finish using 220 or 320 grain
• E24 steel pedestal with cataphoretic protection or black powder coating
• Inter-cabinet glazing of 12 mm tempered glass and panels of 8 mm tempered glass
• All internal components are corrosion protected
• Light pictograms: green arrow and red cross

Safety

Passenger safety :
    safety software (for over- torque) allows the panels to be opened, should a person or obstacle become trapped.
Anti-panic system :
    in case of the loss of power, the panels will open mechanically in the direction of exit.

 

Technical characteristics

  • Power supply : 230 V a.c. ± 5%
  • Frequency : 50-60 Hz
  • Power consumption : Standby 150 VA max – gate in service : 800 VA max
  • Control device voltage : 24 V d.c
  • Flow : 40 passages/minute in controlled passage mode with contactless reader
  • Operating temperature : -5° to 45°
  • Environmental humidity : less than 80%
  • MCBF (mean cycles between failure), where recommendations are observed : 1,500,000 passages
  • Net weight: 120 or 155 kg

Options

  • 316 stainless steel cabinet
  • Laminated glass panels
  • Tinted glass panels
  • Badge reader + 100 badges

In the same product range
produit 31 produit 45